Pallet Server

APILADOR Y DISPENSADOR DE PALETS Mueva palets y deslícelos de una estación de trabajo a otra con este apilador contra balance. Cuenta con un centro de carga horizontal de 18 “y horquillas ajustables de 8” a 28 “. Disponible en 12V DC, 115V AC o aire / aceite. Mueva la unidad fácilmente sobre sus ruedas fenólicas de 8” x 3 “. el control en un cable de bobina de 8 pies es estándar en las unidades de potencia de 12V DC y 115V AC.

Counter Balanced Stackers

Move small loads from one place to another without the need for oversized fork truck equipment. Counterbalance design allows the operator complete access to three sides of the load. The open front enables the forks to be next to workstation for easy loading and unloading. Standard 12V DC power lift with on-board charger. Includes counterbalance. Push buttons to raise and lower lift are located on power unit. Optional hand control on coil cord available. Key-operated ON/OFF control for better security is built into the power unit.

Pallet Master Pallet Server

The Pallet Server, series PM/PS, is designed to be used when a fork truck is not available. The Pallet Master can handle pallets, skids and crates both with and without an understructure. The standard unit has a maximum capacity of 4,000 pounds with a load center within 18 inches from the vertical part of the fork. The 4″ wide forks are adjustable from a 8″ wide minimum, to 37″ wide maximum. The forks are 36″ long for handling a wide variety of pallet sizes. The units rolls easily on two 8″ x 2″ phenolic swivel casters and two 8″ x 2″ Wheels. The lift is operated with a fingertip rocker switch control. An optional remote or on-board battery charger is available. A charge indicator is also available for DC units.

With up to 4,000 pounds of capacity and 60″ of raised height, the pallet server series can be used for a variety of applications.